Need some help with a Husqvarna chain saw

Nick76August 14, 2011

My chain stopped receiving oil. When I run the saw no oil is getting on the chain. When I run it without the chain and bar I see oil coming out of the hole. Not sure why the chain is not getting oiled.

Thank you for reporting this comment. Undo
turnkey4099(SE WA)

Clear the bar groove adn be sure that little bitty oil hole in the bar isn't plugged. I used a Stihl raker gauge that has hooks on one end to scrape the gunk ouit of the the grooves then a blast with an air nozzle usuallyclears that hole.

Harry K

    Bookmark   August 15, 2011 at 3:01AM
Thank you for reporting this comment. Undo
Nick76

Thanks Harry. Worked like a charm!
Nick

    Bookmark   August 15, 2011 at 10:38PM
Sign Up to comment
More Discussions
No more roll pins
Finally got the roll pins out of the wheels on my Horse...
snuffyinatl
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
slowpoke_gardener
2-cycle engine troubleshooting
My 2-cycle blower cannot be started. There is a hot...
slim50
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
© 2015 Houzz Inc. Houzz® The new way to design your home™