chipper vac

bunny1433August 6, 2010

I have a sears walk behind chipper-vac model 987799610 and I cannot find the manual. It starts but dies out right away. I do not know how to to get the air filter off or change the oil, which I suspect is the problem. Can anyone tell me how to do this?

Thank you,

Bunny1433

Thank you for reporting this comment. Undo
canguy(British Columbia)

The model number of the engine would help.

    Bookmark   August 6, 2010 at 11:01PM
Thank you for reporting this comment. Undo
captturbo

If you don't know how to remove the air filter or change the oil, you should probably hire someone who knows a bit more to get it running.

Probably just needs the carb and fuel system cleaned and some fresh fuel.

    Bookmark   August 8, 2010 at 10:35AM
Thank you for reporting this comment. Undo
mla2ofus

I have an MTD and I emptied the gas tank then tipped the vac on it's side to drain the oil out the fill neck.
Mike

    Bookmark   August 8, 2010 at 9:25PM
Thank you for reporting this comment. Undo
bunny1433

thanks to everyone for the tips. I found the manual and took off the air filter and replaced it with a new one and it is working fine.
bunny1433

    Bookmark   August 15, 2010 at 11:10PM
Sign Up to comment
More Discussions
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
Primer not getting Gas?? After Carb Rebuid?
I just rebuilt a couple snow blower Carbs (both Tecumseh...
bertman_gw
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Predator 212cc Engine, Harbor Freight FYI
Hi Folks, Been thinking of getting one of these for...
exmar
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
© 2015 Houzz Inc. Houzz® The new way to design your home™