Stihl 024 won't start

projectsgaloreSeptember 9, 2011

always a good running Saw,now won't start,changed gas,cleaned

fuel tank filter,cleaned carb best i know how,took plug out

got spark,removed air filter sprayed small amount starting fluid in carb that always worked before,but not this time

won't even fire or start at all.anyone with any tips ?

Thank you for reporting this comment. Undo
ewalk

Check for a bright blue spark . You may have to prime the saw with carb cleaner and see if it trys to fire. If so then carb cleaning has not resolved you issues. Try checking the carb filter screen under the diaphram within the carb base. If clear ensure the inlet needle valve is free (moving) allowing fuel to enter the carb metering circuits (jet orifices) which you can use carb spray and tag wire to clean further. Also get some concentrated fuel cleaner and add some to fresh fuel . You should get results if your compression and ignition components are sound.

    Bookmark   September 10, 2011 at 9:25AM
Thank you for reporting this comment. Undo
andyma_gw

have you checked the fuel line for flow?

    Bookmark   September 10, 2011 at 11:24AM
Thank you for reporting this comment. Undo
ladylake(minnesota)

also try a new plug. Steve

    Bookmark   September 11, 2011 at 3:25PM
Sign Up to comment
More Discussions
MTD 8HP SnowBlower
I have an MTD 8hp SnowBlower Mod # 317E640F352. The...
Jeffery Smith
Dewalt 3800 pressure washer, open hole between pump and engine.
Hi, I just bought a dewalt 3800 pressure washer gx...
ron111
Kohler K181 valve clearance
The engine would run perfect for maybe 30-45 minutes,...
snuffyinatl
2-cycle engine troubleshooting
My 2-cycle blower cannot be started. There is a hot...
slim50
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
© 2015 Houzz Inc. Houzz® The new way to design your home™