Pipe clamps for black poly hose

seasonedwarriorJanuary 30, 2013

Greetings: My irrigation system is composed mainly of 1" black poly pipe for the main trunks and then reduced to mainly a drip system. I am very happy with my system but years ago I purchased a hose clamp system that was composed of a heavy brass tool and stainless steel loops. The loop is wrapped around the hose so that you have two wires going aroudn and then the tool fits into the two end of the loop and a heavy screw is turned to tension the loop. I have never had a leak with that system but I can no longer find a supplier who carries it. I hate the screw band clamp systems that are available in most harware stores because they inevitably leak. The wire tens to compress the poly into the barbs of the fittings, the bands just sit on top. Any suggestions??

Thank you for reporting this comment. Undo
lehua49

sw,

Is this what you are talking about.

http://www.ebay.com/sch/i.html?_nkw=wire+hose+clamps

Aloha

    Bookmark   January 31, 2013 at 4:46PM
Thank you for reporting this comment. Undo
Sherwood Botsford(3a)

Lee Valley Tool.
http://www.leevalley.com/en/wood/page.aspx?p=59452&cat=1,43456

Here is a link that might be useful: Clamptite tool.

    Bookmark   July 18, 2013 at 5:47PM
Sign Up to comment
More Discussions
Pulling water from creek for irrigation.
I have a home on a piece of property that has a stream....
mctabish1
Drip Irrigation Help
Hi, I'm looking to install a drip irrigation system...
Dan
Irrigation Outage
Had a power outage at my home. I reset the GFI switch...
mchidiac
Challenge to Irrigate a New Garden Area
I'm putting up a deer fence to enclose an 95'x35' area....
redsun9
Rain Bird SMRT-Y Moisture Sensor
I'm looking to connect a Rain Bird SMRT-Y Moisture...
cdmanoise
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™