An Irrigation Project
I live on 3 acres and would like to extend some irrigation out to my garden area (which is about 1/4 acre). My plan is to tap into the copper piping that runs out to my outdoor faucet and run a line from that out to the garden. It will be about 200 yards of total piping and I want to use schedule 40 PVC. My main question is this: If all I want to do is set up taps or faucets at the end of those lines (I am thinking that I will have maybe 6 faucets), do I need to worry about any of the manifolds or backpressure tricks that are required when you set up sprinklers or can I just literally connect the pipe and then put taps on the end of it where I want them? I hope this question makes sense!!
Thanks for the help....