1975 Tory Built Horse Tiller

joetoeOctober 26, 2010

I am looking to replace the engine on my 1975 Tory Built Horse Tiller, it came with a Tecumseh 6 HP. and about 10 years ago I replce it with a Briggs 5HP and it never could go 2 inches in the ground, in fact it was lucky to go a inch in the ground before it died. With the Tecumseh 6 HP it would dig 6 to 8 inches and keep digging.

I am looking a a Honda 61/2 HP and a Kohler 6 HP which one is the best of the two? Which one has the gutts to dig 6 to 8 inches in the ground?

Thank you for reporting this comment. Undo
gator_rider2(z8 Ga.)

Take look at Harbor freight engine Grayhound 6 1/2 hp overhead valve engine if download there cupon on ste take to store engine be 79.99 if use on farm there no tax most places. I've used mind secse novomber 2008 on 1973 year model with no problems more power than needed. Easy change out this engine Honda knockoff from china made just for Harbor Freight. you need buy 4 new bolts mount engine because metric same length as old and one bolt holds on pulley this bolt sae theads I forgot if nc or nf theads an 5/16 bolt same length as old one.

    Bookmark   October 27, 2010 at 9:35AM
Sign Up to comment
More Discussions
Adjusting Carb on Toro S200 Snow Blower
I have a small 2 stroke Toro S200 Snow Blower that...
rgress
Electrolytic Rust Removal
Has anyone tried this, using a battery charger, "washing...
exmar
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
slowpoke_gardener
© 2015 Houzz Inc. Houzz® The new way to design your home™