Finding buried quick coupler

Stephanie_4567April 27, 2013

I have an irrigation system with a quick coupler which has been buried for several years. I have not been able to find it even though I've raked, cleaned up debris, etc. It has a metal flip top. I even paid someone with a metal detector to try to locate it with no success. I have a general idea where it is. Any other ideas?

Thank you for reporting this comment. Undo
lehua49

Steph,

It should not be that far under the ground surface. Is that correct? Stake thin but stiff probe like a piece of 1/4" or 3/8" diameter rebar or anything that can pierce the ground easily and probe the area in a grid pattern. You will feel and hear the probe strike the top of the grid coupler. GL Aloha

    Bookmark   April 28, 2013 at 2:30AM
Sign Up to comment
More Discussions
Irrigating with portable barrels
I'm wanting to irrigate my garden with a series of...
jon2412
How may drip lines for 4' x 8' beds?
Hi there! I'm trying to decide my drip irrigation layout...
Robin Goodrich
rainbird esp-rzx controller problem
After two summers of working normally, this year the...
MikeSanderson
Challenge to Irrigate a New Garden Area
I'm putting up a deer fence to enclose an 95'x35' area....
redsun9
My sprinkler system station stopped working
Hello! I have a problem with my sprinkler system. One...
holia123
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™