Homelite XL Chainsaw

rmm1November 13, 2010

My saw has another hole in the gas tank other than the one for the fuel line. Its on the outside corner of the tank towards the top(the pull rope side) Should there be something in it like a plug? It is spitting gas out when it runs.

Thank you for reporting this comment. Undo
ewalk

rmm: This may well for the auxiliary breather vent line or crankcase impulse line back to the tank . You will have to forward further Model Designation info . There are a few Homelite Enthusiast's within the Forum who can give you detailed info once they have this necessary data.

    Bookmark   November 13, 2010 at 8:01PM
Thank you for reporting this comment. Undo
rmm1

The UT# is 105064. S/N 780370220. I found a parts diagram. It says that there should be a duck bill check valve there. Does anyone know where I can get one? The part # is 69451 or 89451, its hard to read. Thanks

    Bookmark   November 15, 2010 at 12:17PM
Thank you for reporting this comment. Undo
ewalk

Bill normally handles all Homelite issues. Have not seen him on the forum of late unfortunately . I know you can find one on the Chainsawer.com web site , check it out !

    Bookmark   November 15, 2010 at 1:23PM
Thank you for reporting this comment. Undo
rmm1

I found the part on Ebay, thanks for the help.

    Bookmark   November 15, 2010 at 2:00PM
Sign Up to comment
More Discussions
Smoky 8 horse Kohler
I recently got an old Troy Bilt Horse with the K181...
snuffyinatl
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Chainsaw:Poulan 295 Pro
I just purchased a used Poulan 295 Pro...$50..not bad!...
JDH2015
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
Electric shredder motor will switch on but won't spin the blades
Hello, I have an electric garden shredder that will...
Lindsay Durdle
© 2015 Houzz Inc. Houzz® The new way to design your home™