1 inch rubber hose joiner

chmod007June 16, 2013

Our house came with a very long hose, 1 inch in diameter. It is joined with some brass hardware in the middle. This part has sprung a leak. I tried sealing it with some petroleum jelly, but it didnâÂÂt help much.

I have tried to find a hose repair kit for 1 inch hoses, but come up empty in my online researches. Does anyone have any advice on how to mend this hose, what parts to buy?

Thank you for reporting this comment. Undo
lehua49

ch,
What is the outside diameter of the hose? What is the hose material? Without more info the only idea I can think of is two auto hose clamps with a slightly oversized rubber sleeve. aloha

    Bookmark   June 17, 2013 at 9:52PM
Sign Up to comment
More Discussions
Making changes of existing irrigation system
Hi folks, am hoping you can help me with these questions. I...
lauriec
Fertigation help
ok well not new to gardening or growing things as i...
bigpuddin43
Challenge to Irrigate a New Garden Area
I'm putting up a deer fence to enclose an 95'x35' area....
redsun9
Rain Bird SMRT-Y Moisture Sensor
I'm looking to connect a Rain Bird SMRT-Y Moisture...
cdmanoise
Avocado tree, brown on tip of leaves
The leaves on my avocado tree are turning brown. They...
dooger2
© 2015 Houzz Inc. Houzz® The new way to design your home™