Bib to Timer Hose Help/Suggestions

sethmgJune 4, 2013

Hi All,

I have built myself a make-shift automatic sprinkler system with a four station timer. My hose bib is low to the ground so I need to run a 5 foot hose from the bib to the timer which is attached to a metal stake in the ground. The hose will be under constant pressure. I used a regular garden hose, but it started bulging under the constant pressure, and it if burst I will likely end up with water in my basement.

Anyone have a good suggestion on what kind of hose to use from the bib to the timer? Any links to them on Amazon or other sites where I can purchase them would be really helpful.

I found that some people suggest a washing machine supply hose, but they seen to all have two female ends.

Thanks so much for any help.

This post was edited by sethmg on Tue, Jun 4, 13 at 17:48

Thank you for reporting this comment. Undo
twolips(z6AZ)

Get an adapter to put on the washing machine hose that is male hose threads on both ends.

    Bookmark   June 5, 2013 at 8:28AM
Thank you for reporting this comment. Undo
sheckylovejoy(USDA 10a Sunset 19)

Hey seth, did you ever solve this? I have a similar issue

    Bookmark   August 15, 2013 at 8:12PM
Sign Up to comment
More Discussions
Continuous Loop Dripline
While watching a YouTube video on drip line installation,...
raymondo17
Pulling water from creek for irrigation.
I have a home on a piece of property that has a stream....
mctabish1
Discrepancy in Drip Line Water Flow
Over the weekend I installed some drip line in my garden....
raymondo17
Reusing old well for water needs
I'm building a house and need some advice on how to...
mshepherd2
Challenge to Irrigate a New Garden Area
I'm putting up a deer fence to enclose an 95'x35' area....
redsun9
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™