Hunter Pro C/2 Stations Not Showing

monicakm_gwJuly 19, 2010

I have a Hunter Pro C controller box. Little over a year old. A week or so ago, stations 5 and 6 (of 6) stopped indicating on the controller box when I'm in programming modes. I CAN pull up stations 5 and 6 in manual mode and they DO work (water for the time I've indicated). I've reset the unit but that didn't help. Any ideas?



Thank you for reporting this comment. Undo

Never mind. User error :o

    Bookmark   July 19, 2010 at 2:28PM
Sign Up to comment
More Discussions
Continuous Loop Dripline
While watching a YouTube video on drip line installation,...
2 foot break in sprinkler pvc line
I would appreciate your advice on what to use to repair...
Irritrol RD900 Solenoid Chatter
Hi, I am trying to diagnose a problem with my sprinkler...
Help/Ideas for 12v watering system
I have an old well the is 4 foot around. It is 10ft...
My sprinkler system station stopped working
Hello! I have a problem with my sprinkler system. One...
Sponsored Products
Weston 47-1601 16 Inch Professional Butcher Meat Saw - 47-1601
$38.99 | Hayneedle
Outdoor Fan: Hunter 54 in. Provencal Gold Bayview Ceiling Fan 54098
Home Depot
Premier Polysteel Laser Cut Table - 958-D81-IVORY
$849.99 | Hayneedle
Hunter Teak Table
$287.99 | Dot & Bo
Home Decorators Sisal Area Rug: Rio Honey and Hunter 8' x 10' 6"
Home Depot
Unbranded 1-Light Bronze Original Schoolhouse Ceiling Fan Light 25268
$54.72 | Home Depot
Kenroy Timber Indoor/Outdoor Floor Fountain - 50007WDG
$248.00 | Hayneedle
27187 Hand Held Remote by Hunter Fans
$68.40 | Lumens
© 2015 Houzz Inc. Houzz® The new way to design your home™