Rain Bird help

C.J.15July 1, 2013

Hi, I have a Rain Bird ESP 6. All my zones are coming on and working fine except zone 1. I can turn the valve on manually(at the valve), but it is not responding to the control box. Any suggestions would be helpful. We just moved into this house and I'm trying to get the sprinklers squared away thanks to the help

Thank you for reporting this comment. Undo


Try switching the wire of the bad valve in the terminal section of the controller with one of the good valve wires that is working. If the same valve doesn't work in the new terminal location, the wiring to that controller needs to checked/redone or the solenoid replaced (not hard or expensive). If it does work in the new terminal, I hope you have a spare terminal but you would have to reprogram using that new terminal zone number. aloha

    Bookmark   July 7, 2013 at 11:04AM
Sign Up to comment
More Discussions
Reusing old well for water needs
I'm building a house and need some advice on how to...
drip irrigation design
I ran 2 pipes around my property for drip irrigation....
rainbird esp-rzx controller problem
After two summers of working normally, this year the...
Irrigation Outage
Had a power outage at my home. I reset the GFI switch...
Yet another request for help identifying irrigation valves
Anyone able to help me identify this valve? The house...
© 2015 Houzz Inc. Houzz® The new way to design your home™