Stihl FS61 new carb install

mvronDecember 16, 2013

I got a new carb for this unit. I took the old carb off the trimmer. I'm trying to pry the old carb away from the round choke level part. I'm wondering if there is another fastner somewhere holding these two parts together or is it just a matter of working hard to get the two parts to seperate. I do not want to break something else in the process of seperating the two pieces.

Thank you for reporting this comment. Undo
the_0utsider

If you have this carb off my fs80, then this TK is one piece. if it is the walbro or the TK off my fs65, (which is what it looks like) then the air filter plate DOES seperate from the carb.

    Bookmark   December 18, 2013 at 1:23AM
Thank you for reporting this comment. Undo
mvron

Thanks the-oursider. It is a Walbro and looks kind of like the one in the ;pic. I'll get my hammer and chisel out and go to work.

    Bookmark   December 18, 2013 at 10:02AM
Thank you for reporting this comment. Undo
MantonJohn

Here is a diagram of the Walbro on the FS61

    Bookmark   January 19, 2014 at 11:41AM
Sign Up to comment
More Discussions
Adjusting Carb on Toro S200 Snow Blower
I have a small 2 stroke Toro S200 Snow Blower that...
rgress
troy bilt horse question
Went to check the transmission fluid today and noticed...
snuffyinatl
Troy Bilt Pony Tiller
I have a Troy Bilt Pony Tiller with a 5 HP Briggs and...
beeer_2008
Craftsman Snow Blower - Drive problem
During our big storm last week i noticed I started...
rspin
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™