Ariens 11528LE

jack59December 28, 2009

I have an Ariens 11528LE which starts right up every time but as soon as i hit any snow the impeller and auger stop. We did get some very heavy wet snow in November. The auger and impeller seem to spin fine until they hit any resistance at all. Any help is appreciated.

Thank you for reporting this comment. Undo
canguy(British Columbia)

Remove the belt cover and check the tension on the forward belt when engaged, is it tight. The key in the lower pulley could be sheared, you will need to split the machine to repair it.

    Bookmark   December 28, 2009 at 8:46PM
Sign Up to comment
More Discussions
2-cycle engine troubleshooting
My 2-cycle blower cannot be started. There is a hot...
slim50
Reciprocating Saw
I am looking to buy a reciprocating saw. I am not looking...
pirate94
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Stihl vs. Husqvarna Chainsaw purchase
I am lucky enough to have my wife ask me to pick out...
virginiacowboy
© 2015 Houzz Inc. Houzz® The new way to design your home™