Honda HS622 snowblower Question

hs622December 12, 2007

Hello all,

I have a question on a honda hs622 snowblower. The unit was dripping hydrostatic fluid from the drive shaft seal for a while before I received it. I replaced the seal and wanted to top off the hydrostatic fluid but was not sure how much to add. Does anybody know how much transmission fluid is needed on a hs622? I called the local dealer and they said a quart should be enough to top it off. I added a quart and it looks like it could take more...

Thank you for reporting this comment. Undo
baymee(LehighValleyPA)

The 624 has a reservoir on the handlebars with a level line. Doesn't yours?

    Bookmark   December 13, 2007 at 5:40AM
Thank you for reporting this comment. Undo
zookeeper1025

Hi, I have the same problem. Was the repair something lay persons can accomplish? Did you determine the total capacity? Can you refer me to a good rep manual?
Thanks

    Bookmark   January 10, 2009 at 10:07AM
Thank you for reporting this comment. Undo
keray_rogers_com

I accidently unhooked the springs for the throttle when I was installing a new ignition coil.I don't know whre it was hooked onto
I would apreciate a sketch or a diagram of that area of the snowblower
there are 2 springs-asmall and a bigger ones

    Bookmark   March 25, 2011 at 11:47PM
Sign Up to comment
More Discussions
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Snowblowers and engine choices - Ariens vs Toro vs Simplicity and
I live on the shoreline in CT, where we get anywhere...
bfguilford
Predator 212cc Engine, Harbor Freight FYI
Hi Folks, Been thinking of getting one of these for...
exmar
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Kohler K181 valve clearance
The engine would run perfect for maybe 30-45 minutes,...
snuffyinatl
© 2015 Houzz Inc. Houzz® The new way to design your home™