Hunter ProC Timer

dbrhDecember 30, 2012

I use program A, set one start time, the defualt 12 AM; however, the timer continues to repeat afer it runs through 7 stations. This timer has worked w/no glitches for 4 years now. Any suggestions?

Thank you for reporting this comment. Undo
lehua49

db,

What is the model No.? Do you have a op manual that has troubleshooting? Try setting different zone combinations and see if it occurs because a particular zone is specified. Try different time to see if the time selection is the issue. Contact Hunter Industries to see if they have a solution.

http://www.hunterindustries.com/product/controllers/pro-c

Or just cough up the $60 and buy another controller. aloha

    Bookmark   January 11, 2013 at 10:53PM
Sign Up to comment
More Discussions
Fertigation help
ok well not new to gardening or growing things as i...
bigpuddin43
Help identity sprinkler valve
We bought a house last year that has one zone that...
alg42
drip irrigation design
I ran 2 pipes around my property for drip irrigation....
jimmy21
Rain Bird SMRT-Y Moisture Sensor
I'm looking to connect a Rain Bird SMRT-Y Moisture...
cdmanoise
Challenge to Irrigate a New Garden Area
I'm putting up a deer fence to enclose an 95'x35' area....
redsun9
© 2015 Houzz Inc. Houzz® The new way to design your home™