JD 265 circuit issue

dpetherbridgeJune 13, 2010

While I was cranking over my JD 265 I tried turning the lights on and now it won't do anything when i turn the switch. Did I blow a circuit> Both the 10 and 20 amp fuses look ok.

Thank you for reporting this comment. Undo
gimmodog

Is it possible that you could have bumped the PTO switch while turning on the lights? Just a thought, sounds like something I would do and not think to look at!

    Bookmark   June 14, 2010 at 10:07PM
Thank you for reporting this comment. Undo
dpetherbridge

I checked the PTO switch and it is in the off position. This has me baffled.

    Bookmark   June 21, 2010 at 8:19PM
Thank you for reporting this comment. Undo
smallengineguy(z5 NH)

Check battery connections first.

    Bookmark   June 21, 2010 at 8:57PM
Thank you for reporting this comment. Undo
deeredoctor(z8TX)

10amp is headlights.
20amp is tractor harness.

Prob have a safety switch issue, could be the neutral sw or pto or key sw or even one of the relays. Been a good long while since I worked on one of these.

Is the tractor in neutral? Cycle the shifter,then back to neutral.

    Bookmark   June 23, 2010 at 12:35AM
Sign Up to comment
More Discussions
which is better Simplicity Broadmore 44" or Husqvarna GT48xlsi
I am about ready to order a new mower for my yard....
lcb65
Looking at a John Deere X300 to purchase
I sold my Power Kraft (finally) after a persistent...
Alberti
Request for advice/information on Simplicity Regent 4111
Hello all. I was doing an internet search and found...
mattyruch
Tractor starter-wrong rotation.
As I have been known locally as a lawn tractor fixer,...
rustyj14
New Briggs & Stratton lawn mower engine never needs an oil change
Wonder what Taryl at the Grass Roots Garage would have...
txtom50
© 2015 Houzz Inc. Houzz® The new way to design your home™