Husqvarna YTH24V48 Attachment Clutch Control

David_QJuly 4, 2014

Used my brand new Husqvarna for the first time today on the lawn. The grass was quite long and a bit damp. All worked well to start with cutter blades set at highest point but then I noticed that when I disengaged the attachment clutch control the blades continued to turn - so I was able to get off the tractor with the blades still engaged. Everything else about the clutch control switch seemed to work normally. If I left the control engaged the engine cut off when I got off the tractor. The problem is I haven't been able to turn off the blades. If I cut the engine, when I restart with clutch control off the blades are automatically engaged. Would appreciate any thoughts for how this can be simply fixed.

Thank you for reporting this comment. Undo

if you have read and have followed the operator's manual's instructions for the tractor's setup and operation and your described problem still exists, time to get your dealer involved for warranty repair. The mower deck blades should stop when you disengage the clutch control.

    Bookmark   July 4, 2014 at 8:44AM
Sign Up to comment
More Discussions
Just throwing this out there...
Been thinking of starting a Facebook page on small...
transmission clean and do not overwork
I have a Dumb question about that phrase. Exactly what...
John Deere 445 EFI wet plugs
Tractor won't start until you remove both spark plugs and...
New Briggs & Stratton lawn mower engine never needs an oil change
Wonder what Taryl at the Grass Roots Garage would have...
what yall think about this for a deal a Kubota on CL
here is the link.... what yall think thanks...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™