snapper parts robbing

blackbear62July 19, 2010

need help figuring out which mower to fix...

mower A snapper SR 928 series 14. model 280914BE, 12.5 power Briggs and Stratton, engine model 28V707, Type 1113-E1 this mower threw a rod and damaged the piston

mower B snapper 120 model 281013BE, 12.5 HP briggs and Stratton, engine model 286707, type 4029-02 this mower has gears stripped in rear axle

both have good 28" decks, naturally the engine has been removed from mower A and rear axle from Mower B. my question is can these two be interchanged and which would be the better model to save?

Thank you for reporting this comment. Undo
rustyj14(W/PA)

Simple---install the good engine in the mower that has the good trans-axle, hook it all up, and go mow! I do that a lot--cheapest way to get a good mower, with little cost!

    Bookmark   July 19, 2010 at 8:08PM
Sign Up to comment
More Discussions
Craftsman FS 5500 clutch issue.
With the engine running, when attempting to drive forward...
mrgizmos
old mtd lawnflite chain drive?
Hey I just bought and old riding mower and lo and bohold...
mtdlawnflite
Snapper Riding Lawn Mower Wiring Diagram
I'm trying to find a wiring diagram for a Snapper Rear...
byrondallas
John Deere SRX75 Rider Issue
I have an old Deere SRX75 30" rider with a Kawasaki...
itzbinnice
Ford 1210 hydrostatic clattering when engaged
Is it possible someone is up on this subject here?...
jaceymae
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™