Snapper Rear Engine Rider

klb1642(7)August 8, 2013

Hi I have a 2007 rear engine rider. I was having some problems going up hills. Last night I replaced the drive disc. When I took the old one off it did not have a liner. The new one I bought did. I first put the new one on without the liner. The mower wouldn't move. So then I put the liner in. This worked but now it seems to be making not normal noises and will bascially snap my neck when letting out the clutch. Can anyone help me. Thanks

Thank you for reporting this comment. Undo

I might suggest to dowload the manual if you don't have it and set the disc and brake adjustments.

    Bookmark   August 15, 2013 at 11:37PM
Thank you for reporting this comment. Undo

Thanks for the help. I had the wrong drive disc. The one I needed had the liner already installed.

    Bookmark   August 18, 2013 at 2:59PM
Thank you for reporting this comment. Undo

I Need help to replace the deck belt and the friction drive rubber ring? where to buy the rubber ring for the drive?
it has cracks, worn out. I there any good technique to do?
My RER Snapper is a 33 Hivac model, also the deck is so low how do i raise the deck for a higher cut? held by 2 cables. My grass is high now any ideas is very much appreciated.
Thank you

    Bookmark   September 4, 2013 at 11:41AM
Thank you for reporting this comment. Undo

deck height adj info s/b in yer manual. If you don't have such, chk the link.

for drive disc, just do a google search for snapper parts - should get a bunch of websites to peruse....

Here is a link that might be useful: manual

    Bookmark   September 4, 2013 at 3:35PM
Sign Up to comment
More Discussions
Need help with grass height dial on J.D. X300 mower
I have 2014 JD X300 mower (14 hrs. on it) I've had...
John Deere 245 Won't Start (Kawasaki 14hp)
I have a ~15 year old John Deere 245 with a Kawasaki...
Briggs & Stratton OHV Intek Hard Starting
I am another of the seemingly many people fighting...
tow-behind spreaders
Hi Everyone, I am looking to start using a tow-behind...
PTO problem.
I have a John Deere 190C with 54 in. cut i am having...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™