Murray 10/30 drive belt problem

joe68August 5, 2010

Hi Guys, the drive belt keeps coming off.have checked tensioner, changed bearing, changed belt. Any ideas?

Thanks, Joe

Thank you for reporting this comment. Undo
canguy(British Columbia)

Is it the proper belt or is it a 'will fit'? Are the pulleys bent or misaligned? Are the idler linkages sloppy or bent? Is the belt properly routed?

    Bookmark   August 5, 2010 at 8:30PM
Thank you for reporting this comment. Undo
bushleague(MA)

The input shaft bearings on the transaxle are worn out
which is why you're throwing the belt. Grab the pulley on the transaxle and check for play. There are kits available to repair these, the transaxle will need to be removed however.

    Bookmark   August 5, 2010 at 8:37PM
Sign Up to comment
More Discussions
Poulan XT 38 in. mower dropped a part
So, had my mower serviced for the spring. Cut fine...
scottandrenae
Want to rewire MTD 820 and bypass safety switches. Safety NOT an issue
I have an old MTD 820 and right now , when I turn the...
dooley
Ariens Zoom 2350 zero turn won't start
Model # 915085 with Kohler 23HP engine. Ran fine all...
acralph
Tuff Torq K46 Tranny
I've been reading many of the posts on this site and...
tuco
Hydrostatic Drive Problems??
Craftsman 20.5 HP Kohler Command V twin Under the seat...
jthievin
Sponsored Products
60" Casa Vieja Turbina Oil-Rubbed Bronze Ceiling Fan
Lamps Plus
Personalized Bread Board with Name
$59.50 | FRONTGATE
Home Decorators Area Rug: Melanie Rust 8' x 10'
Home Depot
Arteriors Home - Gallagher Chandelier - 89982
Great Furniture Deal
Cafe creme placemats set of two (one set left)
Origin Crafts
SomerTile 11 x 9.75-inch Casablanca Orion Porcelain Mosaic Tile (Pack of 10)
Overstock.com
Burlap Lined Oval Basket Set
$34.99 | zulily
Dual Thermostatic Shower Valve & Traditional Slide Rail Kit & Handset
Hudson Reed
© 2015 Houzz Inc. Houzz® The new way to design your home™