Sulfur calculation to lower soil pH

greensingh(z6b south jersey)November 27, 2010

Just got back the results from the soil test and the pH came out to be 7.2.

The soil is sandy loam and it has established roses in it. The plants did not look very healthy this year.

I need to get the pH to between 6.2 - 6.8 and the recommendation is :-

Elemental sulfur at a maximum

rate of 1 pound per 1000 square feet. Follow sulfur applications with frequent watering (if rainfall is not

adequate) during subsequent weeks to keep the soil moist and distribute acidity to depth in the soil. Up to three

applications may be made to established plantings in a growing season, with treatments at least 8 weeks apart.

I found the Espoma soil acidifier at the box store which has

Sulfur (S) .........................................................................................................................................................30%

18% ................................................................................................................................................Free Sulfur

12%.......................................................................................................................................Combined Sulfur

with a recommendation of 12lbs/100sqft for 1 point reduction in pH

The area of the bed is close to 100 sqft and the county extension told me to apply 1 cup of elemental sulfur to this area for my soil type.

I am stuck at translating the soil acidifier instructions to elemental sulfur instructions. Does 30% translate to .3 pounds of elemental sulfur per pound of the acidifier? So since I need only .1 pound of elemental sulphur, that should translate to 1/3 pound of the acidifier. Which is very different from the 12lbs recommended on the product.

Definitely missing something here!!!!

I have also attached the test report in text format. TIA

Here is a link that might be useful: soil test report

Thank you for reporting this comment. Undo
gargwarb

Don't pay too much attention to the one-size-fits-all label rate. The extension's rate sounds reasonable to me.
The 18% free sulfur is the only sulfur in the product that you posted that will work towards acidifying the soil. The rest is in the form of gypsum, which won't effect the pH.
Calculating it with 18% sulfur rather than 30 to gets you 0.55 lbs. of the product per 100 sq. ft.

    Bookmark   November 27, 2010 at 10:20AM
Thank you for reporting this comment. Undo
greensingh(z6b south jersey)

Thanks, I will stick with the recommendations of the county extension then.

    Bookmark   November 27, 2010 at 12:25PM
Thank you for reporting this comment. Undo
ericwi

I am using agricultural sulfur to lower pH around our blueberry shrubs, for 14 years now, so I know how to apply and also how to measure pH. Sulfur is not an acid, it must be metabolized by bacteria in the soil, and slowly converts to sulfuric acid, over time, typically one year. The soil pH will be variable during this time, and after all the sulfur has been used up, it will very gradually rise, due to the effect of the surrounding soil and subsoil. If you are watering your roses with tap water that contains calcium and/or magnesium, then the pH will rise over time. Soil pH can be measured by taking a soil sample, mixing it with distilled water, and filtering the mixture to get about one teaspoon of filtrate. This sample is then mixed with several drops of bromothymol blue indicator, and the resulting color indicates the pH. Blue = pH 7.6, or higher. Yellow = pH 6.0, or lower, and varying shades of green mean the pH is between 6.0 and 7.6.

    Bookmark   November 27, 2010 at 1:55PM
Thank you for reporting this comment. Undo
Kimmsr(4a/5b-MI)

Theoretically the percent of sulfur is that much in each boc or bag you buy. In this case, if what you purchased is a one pound box, 30 percent of that would be sulfur or roughly one third of the box. Then to meet that 1 pound per 1,000 ft2 need you would need to purchase about 3 1 pound boxes.

    Bookmark   November 29, 2010 at 7:51AM
Thank you for reporting this comment. Undo
mnten(z7tn)

ericwi,how much sulfer do you put around each blueberry bush? Do you apply each year?

    Bookmark   December 1, 2010 at 2:35PM
Thank you for reporting this comment. Undo
ericwi

This reply is for mntenz7tn, above. Each blueberry shrub gets 6 ounces, by volume, of agricultural sulfur in the bottom of the hole, at time of planting. After the shrub is in the ground, I put another 6 ounces, by volume, of agricultural sulfur, covering the ground to a radius of 16 inches. Next I apply about 6 inches of shredded tree leaves as mulch, so the sulfur is covered up. The initial application is good for two or three years, and after that, I might apply 1/4 cup of sulfur, every other year, but only if a soil pH test indicates a need. Our native soil is quite alkaline, pH = 7.6, and our tap water also has pH = 7.6. I test the soil around our blueberry shrubs twice a year, in the early spring, and again in the fall.

    Bookmark   December 1, 2010 at 5:31PM
Sign Up to comment
More Discussions
Weeds and pollinators
Spring is just around the corner, uh huh yes it is,...
kimmq
Questions re: raised bed soil + composting/fertilizing
Hi, everyone! Longtime lurker, first time poster here...
Angelina Zarre
Berm and Top Soil/Tilling?
I plan on creating a low berm - about 6 inches tall...
Bob Sislow
How to prepare my soil (eastern PA)
Newbie gardener here going into year two. Last year...
mfran12345
what about those compost tumblers?
We just moved from Northern IL to TN and I need a quick...
ryseryse_2004
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™