Return to the Garden Accoutrements Forum
| Post a Follow-Up
Plug for Fountain
| | |
Posted by PlantingPaddy IL (My Page) on Tue, Jul 19, 11 at 18:42
| The center bottom of my 3 ft diameter fountain has a 1 1/4" drain hole. I'd like to run a 12v power line for lights, a 12v power line for a pump, and a 1/4" water line up through this hole. What can I use as a plug to accomodate these three lines and still maintain the water seal? Is drilling holes through a rubber stopper and slitting its sides and backfilling with silicone the only solution? I'm wondering if there's a removable (reusable) moldable waterproof material. It will be covered so it doesn't have to be pretty? |
Follow-Up Postings:
RE: Plug for Fountain
| | |
| Silicon caulking . It can be removed if needed. That is the only thing that i know that is water proof |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garden Accoutrements Forum
|
|
|
