|
Mon, Aug 4, 08 at 10:59
| I made a water fountain from a resin planter. I want the water to cascade over the edge of the pot, but it just clings to the pot and follows the shape of the pot down to the bottom. Is there anything I can do to make the water cascade instead of cling to the pot? (I have the fountain over a sunken plastic bucket containing the pump and water, topped with decorative rocks) |
Follow-Up Postings:
|
| Glue a small piece of clear plastic over the lip of the pot. You will not see the clear plastic once the water runs over it. It is the property of water to follow a curved surface. The plastic will get the water away from the curved lip of the pot. dcarch |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garden Accoutrements Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.