|
| I live in NC in zone 7b. This begonia is on my parents' covered porch (same area) and has done pretty well through the winter. It is 10-12 inches tall. Can I prune it any? If so, how much/how/when? Thx! |
Follow-Up Postings:
|
- Posted by ken_adrian z5 (My Page) on Tue, Feb 19, 13 at 11:30
| at every leaf connection.. a node.. if you look close.. you should see a very tiny bud ... if so.. cut just above such.. and that node will trigger ... with a razor blade.. you can cut each piece above.. that you cut off.. and stick it in moist potting media.. and put it in a plastic bag.. and make as many hundred of the plant as you want ... you could probably cut that back to about 2 inches ... with little fear ... but to learn.. i suggest you take one big piece off.. give it a week.. and see if you can see the bud enlarging.. and once you do.. you can do the rest ... with little fear you kill the whole thing.. no one says you have to prune to whole.. at one fell swoop.. cut and learn ... ken |
|
| You've got one of the easiest of the begonias to take care of...Begonia semperflorens-cultorum. You can safely snip these plants pretty much as low as you want. Please wait a few weeks for the fastest response from your plant and snip away with a pair of clean, sharp scissors. Don't be hesitant....your goal is to create a fuller, shaplier plant. You could even cut this plant neary to the base and let it regrow all new growth as ken suggests. Again, wait until the days are longer; provide the plant with a dose of fertilizer. Both will make sure that the plant bursts into new growth rapidly. You might tell your parents that frequent pinching will help keep the plant fat and happy.
|
|
| You can pinch it back just about as far as you want to. Landscapers use chain saws on it and it bounces right back. |
|
- Posted by ken_adrian z5 (My Page) on Tue, Feb 19, 13 at 15:35
| eham.. i want to see a begonia that needs a chainsaw.. they do NOT grow that big in MI ... ken |
|
| I suspect that eahamel means power hedgers, not chainsaws. 'Cause they sure don't grow that big period! |
|
| Probably a power hedger! They don't get that large, but that's how large beds of them are pruned. Same with the vinca major and grape ivy that are used for a ground cover. |
|
- Posted by carolinaflowerlover 7b (My Page) on Tue, Feb 19, 13 at 18:16
| Wow! Awesome help, thx! I wish we could get them that big here in NC! I do love how easy to take care of they are. :) |
|
- Posted by ken_adrian z5 (My Page) on Tue, Feb 19, 13 at 18:18
| i found that any kind of snippers.. crushed the stems too much .. for rooting purposes ... a new blade will slice thru like butter ... ken |
|
| Ken, good sharp snips or scissors cut cleanly. I understand your concern about smushing the stems....that is very valid. But the right tools do the job perfectly well. I have some little plant snips so sharp that they can cut paper on one of the blades. I've seen people use a dull knife or kitchen scissors or even their fingers to prepare cuttings! |
|
- Posted by ken_adrian z5 (My Page) on Wed, Feb 20, 13 at 8:25
| yes rhiz.. on this plant ... there is no wrong way ... and i presumed.. you as a highly trained professional.. have the right tool ... but .. on this plant as a matter of fact.. i recall back in the 60's when i was a kid ... and dad had his 15 year old montgomery wards, dull as a bowling ball anvil shears .... [probably from me using them to cut wire.. lol] .... they didnt really cut anything.. it was more of a squish and tear method ... lol... ahhh.. memories.. lol ken |
|
- Posted by purpleinopp 8b AL (My Page) on Wed, Feb 20, 13 at 10:41
| The stems on this plant will likely snap when bent. That's how I prefer to do it. I've noticed that the ones that don't snap usually don't propagate either. That's a great looking plant. You mentioned that you don't live where the plant does, so may not get there often enough to do this, but I'm sure your folks can handle it if they like the idea. If it was mine, I would trim the 2 tallest pieces first (down to the lowest leaf, or about 2" if there are no lower leaves.) Then trim another one or two in a couple weeks, doing it gradually, continually, so it never looks vastly different but is regularly being encouraged to be more branched and bushy. That way you're also not removing all of the flowers at any time. The pieces you remove can be stuck back in the pot, or in other places/pots. |
|
- Posted by carolinaflowerlover 7b (My Page) on Fri, Feb 22, 13 at 21:05
| Thanks, purple! I am next door, so I can take the time to do it that way. It was a clearance begonia, but dad has taken great care of it! |
|
- Posted by purpleinopp 8b AL (My Page) on Sat, Feb 23, 13 at 12:26
| Glad you like the idea, that's how I "do" mine. How "everybody loves Raymond" is your housing situation?! LOL! Tell Dad to keep up the great work! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Annuals Forum
Information about Posting
- You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
- Please review our Rules of Play before posting.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
- After posting your message, you may need to refresh the forum page in order to see it.
- Before posting copyrighted material, please read about Copyright and Fair Use.
- We have a strict no-advertising policy!
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
Learn more about in-text links on this page here
