|
Sun, Feb 27, 05 at 9:44
| I work at a garden center, and someone gave us an old, overgrown jade plant the other day, which disintegrated into many pieces when we removed it from the pot. One piece was sort of curvy, didn't have many roots, but just begged to be bonsai'd. I put it into a bonsai tray with cactus soil, and mounded the soil up around the trunk to stabilize it, then tied it to a stake to maintain the twisty trunk.
My question is how hard is it to bonsai a standard jade? I've seen the miniature species bonsai'd, but never a standard. Is it actually possible, or should I just put it into another pot? |
Follow-Up Postings:
|
- Posted by Simonyi 5B (mistermoyogi@yahoo.com) on Sun, Feb 27, 05 at 11:04
| Bruggirl: Many believe that jade is not suitable material for bonsai...Personally, I enjoy working with the species.It is not difficult to work with standard jade - Crassula argentea - I have found that judicious and more or less continuous pinching will result in compact growth and control the legginess which is associated with plants that have been somewhat neglected. In your Zone you should get very good results. Good Luck! Regards, |
|
| Tom is right. Eventhough standard jade doesn't have a place in bonsai world, it doesn't bother me. I actually have quite a few big jades with trunk caliper around 3" to 4". I love them. Andy |
|
| Oh Andy. There is a place in the bonsai world for us jade lovers. Out of sight and out of mind:-). randy |
|
- Posted by Simonyi 5B (mistermoyogi@yahoo.com) on Mon, Feb 28, 05 at 10:08
| I must agree with you, Randy... us Jade lovers are neither to be seen nor heard... Regards, |
|
| I just purchased my first Jade bonsai. Why isn't it considered a good candidate for bonsai? Who is setting the standards for Jade? |
|
- Posted by castorcrap z5 wv & z6 Md (My Page) on Fri, Dec 2, 05 at 0:36
| I have a young jade that has branched 2" above the soil. I know eventually I will want to cut the branch away when I go for the giant jade bonsai. Should I do it now to avoid scarring? Or do I leave it as a sacrifice branch? I know not to do recessed cuts on jade to avoid rot, but Can I cut it flush w/ the stem? Or "am I only allowed" to cut it to the 1st bud? I want the first 12" of the tree to just be a massive plain trunk. thanks, alex |
|
| Alex I would take it off now flush to the trunk with a very sharp knife. randy |
|
- Posted by katiemae2581 Parkersburg WV (My Page) on Tue, Jun 24, 08 at 15:48
| Hi everyone. I have a small mini Jade plant that I propagated from a friend's damaged plant four or five years ago. Hers was a bonsai, and I have dried to duplicate it with my cutting. It has done very well as far as general growth, but it refuses to branch. Last summer I (nervously) decided to top it, and cut off three inches hoping to root the cutting as well (didn't work). Now I'm back where I started...5-6 inches, no branching, and a spindly trunk. Any advice on getting my mini Jade to 'fatten up'? It is in a 3" ceramic pot that I'm starting to think may be too deep (also 3"). Thanks in advance, guys! |
|
| Either it's just not genetically programmed to branch, or else it's not getting enough light, it's too young to branch, or it's time for you to pick up your own little very inexpensive plant at the supermarket. You didn't say how often it's watered or what kind of soil mix it's in, so it's hard to guess at anything else. |
|
- Posted by christoula (My Page) on Wed, Aug 5, 09 at 12:36
| I have many small jades that I have been working into bonsai tech. for going on my first year and the results have been amazing.. slow.. but amazing. All different sizes and shapes too. I have one that is only about two and a half inches tall but the trunk is about 3/4" thick with three main branches. I love using jade with this technique! Good Luck.. I would post pics but as most of you out there know, my computer just wont let me post here!! Christina |
|
- Posted by greenman28 Nor Cal 7/8 (My Page) on Wed, Aug 5, 09 at 17:22
| Hey, Christina! Here's an old Thread, eh? ;) Well, I guess I'll slap a few pics up, for anyone searching "Jade bonsai" in the future. As a general rule, small-leafed Jades are easier to work into proportion. However, the straight Crassula ovata makes a nice macro-bonsai! These are a few of my recent projects. Big Jade cutting - branches will be cut back to emphasize the trunk! Then I have these two cuttings in temporary pots against temporary stones. I also like Jade 'Skinny Fingers' - I call this one "Cactus Jack" because it reminds me of a saguaro. One nice thing about Jades is that they can be re-staged as they grow, providing for a variety of stylings. Josh |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bonsai Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.