Return to the Container Gardening Forum | Post a Follow-Up

 o
to modify 5-1-1 for container vegetables

Posted by joeworm n fl (My Page) on
Sat, Mar 10, 12 at 8:21

using 100% pine bark, because it is economical for me to use all pine bark.....it is what i can afford.

will the following work?

5 parts pine bark fines screened 1/8" - 1/4".
1 part pine bark fines screened 1/16" - dust.
1 part pine bark fines screened 3/8".
lime......
fertilizer.......

thanks


Follow-Up Postings:

 o
RE: to modify 5-1-1 for container vegetables

I often use 100% pine bark soil conditioner in my large whiskey barrel containers. I don't screen, but almost all of the product is less than 1/4" and around 10% will pass through insect screen. This "mix" is certainly less than ideal, but performs adequately for my tomatoes and annual flowers.

I don't use the soil more than one growing season as rapid breakdown and compaction will begin to occur after that time. The spent soil is useful as a mulch or soil conditioner.


 o
RE: to modify 5-1-1 for container vegetables

  • Posted by tapla z5b-6a mid-MI (My Page) on
    Sat, Mar 10, 12 at 10:56

As JD alluded to, you can do almost anything you want, and with a little effort, MAKE it work.

On a per volume basis, perlite and peat aren't that much more expensive than the bark, unless you get the bark free; so if you need a fair volume of soil the expense of a 4 cu ft bag of perlite and a big bale of peat isn't that great.

In peat based soils, perlite mainly serves to reduce water retention. It really doesn't improve drainage/aeration much because the fine particles of peat simply filter in between and pack around the perlite particles; but in pine bark based soils, perlite DOES increase aeration and drainage, by virtue of the fact it gets wedged between the flat bark pieces, creating macro-pores and opening channels through which water flows easily.

Hopefully, you'll be able to see your way clear to at least get the perlite, if not the peat. I think it will make a significant difference.

Al


 o
RE: to modify 5-1-1 for container vegetables

Here is how the bark breaks down size wise after screening through different size hardware cloth.

12% of the bark is - 1/4" to 3/8". used 1/4" hardware cloth to screen bark.

36% of the bark is - 1/8" to 1/4". used 1/8" hardware cloth to screen bark that remained from above screening.

32% of the bark is - window screen to 1/8". used window screen to screen bark that remained from above screening.

20% - amount that passed through the window screen.

If I compromise and use perlite but not peat, how would the 5-1-1 mix be made using the above size pine bark fines with the perlite?

Thanks


 o
RE: to modify 5-1-1 for container vegetables

Part of your reluctance to buy perlite may be due to the ridiculous prices of the small bags you see at the box stores. The 4 cu. ft. bags are usually only found at independent nurseries in my area. I still pay $30 for 4 cu. ft. of perlite, whereas pine bark can be had for $1 per cu. ft.

I should add that my whiskey barrel containers have huge drain holes and sit on well drained soil. Some of the container soil is in contact with the earth below. This leads to a natural wicking effect that helps balance the less than ideal drainage of a 100% bark mix. Including perlite does lead to noticeably positive effects in all my other containers with a 5-1-1 type mix.


 o
RE: to modify 5-1-1 for container vegetables

I strongly recommend adding Perlite.

Bark will hold an excess amount of moisture and will dry differentially throughout the layers.
By itself, it is not an optimal medium. With the simple addition of Perlite, I've grown healthy
maples (for a season), as well as a fig tree, willows, osage, and few others I'm not remembering.

Hydroponic shops usually carry large bags of coarse Perlite. I buy 4 cu. ft. for $20.


Josh


 o
RE: to modify 5-1-1 for container vegetables

  • Posted by abnorm Central Florida (My Page) on
    Sat, Mar 10, 12 at 14:36

Joe....I told you about Elixson....did you go with the bagged product or the bulk?.....I laughed when he said "....with a big enough trailer it's $10 a cubic yard..."

I agree with Josh about the Hydro stores....Florida abounds with them....I still pay less than $20 a bag for Perlite.

Why are you screening ?

These are Vegetables...I've taken a simpler approach...I don't screen...I don't add peat...5-0-1 ?

To each Bag of PBF I add 3 gal of perlite and about 2 cups of lime (powder) and a small cup of CRF....This year I got a tumbler/composter.....Oh so nice and fluffy....what a pretty end product....I have never got the lime blended with the bark as well.....

and

THANK YOU Al....for the Education, Patience, and Friendship.

doug


 o
RE: to modify 5-1-1 for container vegetables

Thanks ya'll, guess I'll try to find a 4cf bag of perlite.

Abnorm, I did get 2 cubic yards of pine bark fines from Elixson in Starke. They have quite a large operation there. I was expecting a small mom and pop type business so I was impressed to see the mountains of pine bark scattered over several acres and all of the heavy equipment thay have to grind and move the material around.

I screened the bark mostly out of curiosity to see how much of what size there was. It's all usable so there is really no need to screen. Nothing too big to screen out.

With 50% passing through a 1/8" screen, I figured that small size could replace the peat.


 o
RE: to modify 5-1-1 for container vegetables

"If I compromise and use perlite but not peat, how would the 5-1-1 mix be made using the above size pine bark fines with the perlite?"

I would make the bulk of the "5" portion from the 1/8" - 3/8" range, with anywhere from 1/2 to 1 part of that made from the Window Screen - 1/8" range.

For the "peat fraction", I would use 1/2 to 1 part of the Window Screen to Dust range.

I would use 1 part course perlite (window screen and up). I personlly break down my perlite into ranges, to ensure I get a 50/50 mix of particles greater and less than 1/8". Not necessary, it's just my preference.

"It's all usable so there is really no need to screen."

I personally think that it is important to screen. If you don't, you are guaranteed to have varying compositions from mix to mix because your bark will vary from batch to batch. I don't like that. I want to know exactly whats in each mix, and I want the ability to adjust the characteristics to my liking.

PJ


 o
RE: to modify 5-1-1 for container vegetables

Well said, PJ!

Josh


 o
RE: to modify 5-1-1 for container vegetables

Your analysis looks good, thanks for the help.
I'm looking for the 4 cf bags of course perlite, when I find that I'll be good to go.


 o
RE: to modify 5-1-1 for container vegetables

Getting back to screening the perlite.

I'm a bit confused. You say to use coarse which you say is window screen and up size. Then you say a 50/50 mix with 50% below 1/8" and 50% over 1/8".
Can you unconfuse me??
Thanks


 o
RE: to modify 5-1-1 for container vegetables

Joe, where are you located?
I would recommend you use Perlite that is larger than what passes through window-screen.

PJ is growing in Florida, and so his personal preference is a mix that retains more moisture
in the heat (PJ, correct me if I'm wrong on that!).


Josh


 o
RE: to modify 5-1-1 for container vegetables

I'm in north Florida, plenty hot here too.


 o
RE: to modify 5-1-1 for container vegetables

Sorry for the delay...and for the confusion! Let me try this again.

"I'm a bit confused. You say to use coarse which you say is window screen and up size. Then you say a 50/50 mix with 50% below 1/8" and 50% over 1/8"."

Everything that I use is sized greater than window screen. Remember, window screen is 1/16". My preference is that I pass the perlite through a 1/8" mesh first, then pass that through the window screen. What passes the window screen gets discarded. I then use 1/2 part > 1/8" and 1/2 part < 1/8" to round out my perlite fraction.

"Well said, PJ!"

Thanks Josh! I learned from the best =)

PJ


 o
RE: to modify 5-1-1 for container vegetables

Thanks for clarifying that. Next is finding the perlite in large affordable bags.

Thanks for the help.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Container Gardening Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here