Return to the Landscape Design Forum | Post a Follow-Up

Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

Posted by deborahb_gardener (My Page) on
Mon, Dec 21, 09 at 17:33

Our sidewalk is a 5 feet wide long strip that fronts the house. A couple of huge trees have large roots that are rising above surface and have dislocated the concrete covering that used to be there.

We plan to remove the concrete and resurface but are unclear how.

The roots are likely to throw off any other material placed over the roots.

We are thinking of putting simply grass around the tree, but we still need something that is rather flexible but also solid enough to walk on, especially if there is rain.

Bricks and slabs of stone would also be pushed up if there was any movement in the soil.

Any ideas? many thanks

Follow-Up Postings:

RE: Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

  • Posted by catkim San Diego 10/24 (My Page) on
    Mon, Dec 21, 09 at 23:06

Is it your sidewalk or the city's sidewalk? First review the laws; you may not have the options you have described.

If it really is your sidewalk and your property, is it possible to detour around the offending roots with a gentle curve? Otherwise, you may have to remove the roots and re-pour the concrete. Any other material with the roots intact will not be a walkway, but a hazard.

RE: Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

  • Posted by bahia SF Bay Area (My Page) on
    Tue, Dec 22, 09 at 0:05

If this isn't a public sidewalk at the street, Kim's suggestion to reroute the walk further away from the tree trunks is probably the best approach. If the new walk is also going to be concrete, you might want to include a root barrier with a biocide impregnated on one side to keep new roots from doing the same thing.

If this walk is not a public sidewalk, and your situation allows, using a raised boardwalk to span the offending roots with sleepers set over concrete piers may be a better way to cross this area with least disturbance of existing tree roots.

Some pictures of the spot and more information would be useful to give better advice.

RE: Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

You might research a non permeable product called Terra Pave to see if it is a good fit with your climate and site specific situation.

Terra pave was recently installed in a very upscale old established neighborhood as a pedestrian and bike path . This neighborhood had its streets lined with old established heritage trees that had tons of tree roots lifting the sidewalks.

The city removed the damaged concrete paths and replaced the path with decomposed granite.
The upscale ( multi gazillion dollar homes ) neighbors complained that the decompose granite was 'dirty' and tracked onto their driveways.
So they removed the decomposed granite and installed Terra Pave.
Terra Pave looks like a cross between asphalt and decomposed granite.
It is non porous and extremely stable.
It cannot be installed during the rainy season due to the natural stabilizer ( I think it is pine pitch ).
Locally in Northern California a company called Wheeler Zameroni offers it.

You might check out the spec's and see if it is a good fit for your installation.

RE: Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

Thank you for all the messages.

Yes, the sidewalk is privately owned and maintained by the landlord.

I will be looking at all these options, though we do need to go over the roots at some points, as there is not enough room for a small pathway around them.

Will the tree not be damaged if we cut through its roots? It is old and big, but still...

I found Terrapave on the web and I am also looking at decomposed granite, but that does not sound like the best choice.

Many thanks again.

RE: Best Pathway/Sidewalk Material for Hard, Uneven Surfaces

If those big roots are lifting the sidewalk next to the house, they are on their way to the house. Most trees can sustain damage to the odd root but some don't take well to it at all and damage to several roots is likely not a good idea - especially for a large tree near a house, since roots function in part to keep trees upright. Learning what kind of tree it is will help you determine not only how it is likely to respond to root cutting but also what its roots (and the rest of it) are likely to do in the future.

One thing I have done around tree roots is to use paving stones, laying them around and between the tree roots. But this has only been for a back pathway to the alley; for a front sidewalk used by guests or the mail carrier, this is not good enough.

Bottom line is that if a tree is causing trouble around structures, you want to think about the long term viability of this tree in this location before doing contortions to adapt to the tree. You might put thousands into a new sidewalk only to find that the tree is removed within five years for its other incursions as it grows... canopy, other root problems, etc.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Landscape Design Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here