|
Sat, May 5, 12 at 12:37
| I like your forum and know that there are a lot of handymen.
I need to connect new gutter line with old one. Somebody knows how to make gutter branch? Regular metal gutter. |
Follow-Up Postings:
|
- Posted by purpleinopp 8b AL (My Page) on Mon, May 7, 12 at 16:01
| For some reason there's no "roof" section of home questions over on the home section, but there is a repair forum. Maybe there is a roof forum and I just didn't see it... |
|
- Posted by marlene_2008 7 (My Page) on Mon, May 7, 12 at 21:09
| My DH says that if it is a seamless gutter, then you can run the new piece inside of the other (downhill so the water doesn't come out of the joint) and pop rivet it in place. Or if it is an old type metal gutter, then you can buy a coupling to join the two together. Good luck! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garden Junk Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.