Return to the Garden Junk Forum | Post a Follow-Up

Plate Flowers

Posted by naninhi Z5-high desert (My Page) on
Mon, Jun 2, 14 at 19:46

Hi Y'ALL Enjoying making them..but is there anyway to
"englue" them?? I'm using GE Silicone II Clear. I made a birdbath and now want to change the top....any ideas???

Follow-Up Postings:

RE: Plate Flowers

The only thing I've had work is to take a knife, putty knife, or pie server and start working around the edges until it will come off. If it hasn't been set for a long time, it will probably come off easier.

Good luck!

RE: Plate Flowers

My mind must have gone blank for a moment as your very simple answer should have occured to me. Thanks it worked like a charm :)

RE: Plate Flowers

That's what I do also. Make sure you get ALL the old adhesive off because nothing will stick to silicone after it cures. I scrape, then sand to make sure it's all gone.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garden Junk Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here