|
Wed, Feb 15, 12 at 10:29
| My yard is very bumpy. I bought a used Mclane reel mower last week and I would like to start cutting low this spring. I do plan to level but I am going to wait until the summer for that project. My question is will a roller bar from reelmowerroller.com help with the scalping? If so, how big of a difference can you tell after you add the roller? Thanks. |
Follow-Up Postings:
|
| Hard to say. If there are places in your lawn that the front casters can fall in to, then yes, a roller will help. But if a bump in the lawn can protrude in between the roller and bedknife and is taller than your height of cut, then it will still scalp. Only way to tell is to just do it to it and see what happens! Good luck! |
|
| I think jonmhenderson has direct experience with a Mclane with and without a roller. Not sure how private messaging works on this site or if there is any, but you might try to get a hold of him. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.