|
Tue, Apr 10, 12 at 16:10
| Hello all,
I ended up with an Imperial 600a Roto-Spreader with the new house. Trying to figure out the settings and the googles is not being helpful. Anyone familiar with this spreader and know the rate of the settings or which more readily available spreader is similar? Thanks! |
Follow-Up Postings:
|
- Posted by dchall_san_antonio 8 San Antonio (My Page) on Wed, Apr 11, 12 at 22:54
| You'll have to calibrate it yourself. It will need to be calibrated for every different material you use in it. Measure a pound of stuff and put it into the spreader. Measure 1,000 square feet and start spreading. Watch how it is flowing to get a feel for how much is going down versus how much you are supposed to apply. Then make your adjustments. Everyone should do that with every spreader. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.