|
Sat, Jun 4, 11 at 8:35
| Hey folks, I have a 21" lawn mower deck and am looking for a roller to stripe my lawn, but can only find 18 and 24" rollers. Do they make 21" or should I just use an 18 or 24"? |
Follow-Up Postings:
|
- Posted by Ibanez540r none (My Page) on Sat, Jun 4, 11 at 9:13
| Your wheels are probably 1-1.5in. each. So, that leaves about 18inches between them. 18 will work because you wheels will be laying down the rest. Something like this with the roller between the tires; II------II ...most rollers are shorter than actual cutting width. |
|
- Posted by rosemallow z7 Md (My Page) on Sun, Jun 5, 11 at 6:36
| Honda makes walk behind striping lawn mowers. They are only sold in the UK. Hopefully they will be available here soon. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.