|
| So in my effort to rid my yard of pythium Lesco had lots of liquid options.
My issue was ive never applied liquid. I have a 16,000 sq/ft yard and then another yard of around 20,000 sq/ft. Lesco felt liquid would be best, but did sell me granular. Going forward if I wanted to do anything liquid, what do you use to apply it? I see pull behind sprayers, but can they be adjusted to setting like 4oz per 1k? Any tips or insight would be great! |
Follow-Up Postings:
|
| Not silly. You will have already calibrated your sprayer to know how many gallons of water it applies over a 1000 square foot. Then you simply dilute the product into that many gallons of water. So if your sprayer applied at a 1 gallon per 1k rate, you would mix your 4 oz. into 1 gallon of water. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.