|
| This year I bought a home with a lawn to look after for the first time since I was a teenager cutting my parents grass. The lawn is pretty small at least by Texas standards (under 3000 sq ft) and I bought a reel mower to keep it trim, which I'm generally quite happy with. Problem is I have grass running right up to the house wall, as well as patio/driveway, but the mower wheels are positioned such that there's no way the blades can get within 3 inches of the edge of the grass. I remember seeing at least one mower where the reel blades extended beyond the wheels to avoid this exact problem, but at the time I wasn't sure what I was getting into and bought about the cheapest model I could find.
I need a tool to trim the grass along the house and patio/driveway. In the spirit of the reel mower I'd like some kind of manual shears rather than an electric or gas powered weed whacker. I'd like advice about whether to get some small hand shears that will mean crawling along the edge of the lawn, or if there is a well recommended long handled pair of shears with or without a wheel, etc. I'd welcome any thoughts from anyone who uses manual shears for edging. For reference the lawn in front of the house is St Augustine while in the back I have Empire Zoysia. |
Follow-Up Postings:
|
| While it is politically correct to use manual shears for trimming around the house and flowers, your back and knees will do you in. For your size of lot I would recommend getting a good electric string trimmer. I say electric because I doubt there is anything that requires trimming on your lot that is more than 100 feet from an outlet. With electric there is no gas tank, mixing gas, or starting problems, just plug the drop cord into the house pull it to where you are trimming and pull the trigger. PS My old Craftsman electric finally died after about 15 years. If you are bound to use the manual I would recommend getting one that has a long handle so you can stand up and do the cutting. Remember the back and knees. |
|
- Posted by Lawn_Hobby none (My Page) on Fri, Oct 19, 12 at 16:14
| Just to piggyback on this question...how can one sharpen manual shears? I've been trying to figure it out, but am not sure...? |
|
- Posted by nearandwest 7 (My Page) on Sat, Oct 20, 12 at 11:37
| In the spirit of the manual reel mower, what you are looking for is a flat spade, and is sometimes called a manual turf edger. You can find it where gardening hand tools are sold. It has a 3-4 foot handle and a flat square blade about 5" wide at the bottom of the handle. I have used one for years for just that same purpose (although now I use a reciprocating edger), and I still have the original flat spade I purchased nearly 20 years ago. |
|
- Posted by ArchieBunker none (My Page) on Wed, Oct 24, 12 at 16:38
| Search Amazon.com or other source for "edging shears". These are long-handled tools that have shearing blades set vertically or horizontally. They are great for small areas, and less trauma than a string trimmer. These tools seem to be imported from England or Australia, and you are not likely to find them at your local store. |
|
| We had a pair of the right angle shears in my childhood home for as long as I can remember. Most likely just bought at a local hardware store in the 50's or maybe even before. Used for at least 40 years, probably still going strong somewhere. I bought a pair for my own home recently. Two months and the handle broke. Just venting, but this seemed like a good place to do it. |
|
| Quercus, you're reminding me of an old tool I used to use--the long-handled shears that saved you getting down on all fours....I imagine you can still find them in the garden tool section of a hardware or nursery. I'm always trying to visualize what size of lawn people quote by giving square footage and I do that by square rooting. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.