Shop Products
Houzz Logo Print
jehomey123

craftsman thought I fixed it

jehomey123
12 years ago

I have a Craftsman 54" 22.5 hp kohler command. I posted a couple years ago and it was suggested I rebuild my transaxle. Tractor only had 5th and reverse when I put it in 4th or 6th drive belt would smoke tractor would move. It got worse finally I couldnt even shift into ant gear. Rebuilt transaxle abt five bad gears replaced them. Back together and its doing same thing only shifts into 5th gear drive belt smokes in the other gears. When i push clutch/brake in the trans pulley is still spinning. Maybe shift lever is bad. any suggestions would be appreciated. Thanks jehomey 123

Comments (9)