Return to the Lawn Mowers Forum | Post a Follow-Up

Tru-cut C25 Back Lapping

Posted by diamondicons none (My Page) on
Sat, Feb 9, 13 at 18:11

Does anyone have the instructions to back lap a Tru-cut C-25 mower. Thanks! Mike

Follow-Up Postings:

RE: Tru-cut C25 Back Lapping

Well, i ain't never tried it, but it sure sounds interesting! Isn't that something you do with diamonds?
The only thing i do is: Remove blade, turn on bench grinder, set blade on tool rest, and slide blade along the turning grinding wheel. I check it some, then when it is uniform in shape, i figger its about right.
As for balance--i figger, if ya have to remove so much metal to make it look nice, and balance it----ya might as well replace it! Also--the first time ya hits a stone, or edge of sidewalk, there goes yer nice lapped edge!

RE: Tru-cut C25 Back Lapping

You may find some info here.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here