|
Sat, Feb 9, 13 at 18:11
| Does anyone have the instructions to back lap a Tru-cut C-25 mower. Thanks! Mike |
Follow-Up Postings:
|
| Well, i ain't never tried it, but it sure sounds interesting! Isn't that something you do with diamonds? The only thing i do is: Remove blade, turn on bench grinder, set blade on tool rest, and slide blade along the turning grinding wheel. I check it some, then when it is uniform in shape, i figger its about right. As for balance--i figger, if ya have to remove so much metal to make it look nice, and balance it----ya might as well replace it! Also--the first time ya hits a stone, or edge of sidewalk, there goes yer nice lapped edge! |
|
| You may find some info here. http://www.ehow.com/how_12143463_adjust-bedknife-trucut-lawn-mower.htm l |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.