|
Sun, Mar 11, 12 at 17:32
| I need to replace the flywheel nut for an old 2 stroke Suzuki on a Toro 21" walk-behind mower.
I cross-threaded the old one so it's a little hard to match up using a sizer. It's the weekend and Toro parts dealers are closed. Any chance somebody out there knows the size and I can run to a hardware store and pick up a comparable nut? Thanks Carl
|
Follow-Up Postings:
|
- Posted by ggoyeneche New Jersey (My Page) on Sun, Mar 11, 12 at 19:24
| I think it's an M12 x 1.5 or M12 x 1.25. |
|
- Posted by cdsol z7 TX (cdsol@swbell.net) on Fri, Mar 16, 12 at 12:54
| ggoyeneche, you got me in the right ballpark - it was M10 X 1.25. Important thing was realizing it was metric not SAE. Sorry, didn't get a moment to log back in and thank you last week. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.