Return to the Lawn Mowers Forum | Post a Follow-Up

 o
Sthil FS36 Weed-eater

Posted by gearhead22 (My Page) on
Fri, Apr 9, 10 at 0:25

My Sthil FS 36 weed-eater starts fine while on choke but when I turn the Choke back to run the engine cuts out. Does any one know where I can find the carburetor adjustment screws at? or is that not the problem?


Follow-Up Postings:

 o
RE: Sthil FS36 Weed-eater

Try a new gasoline filter first. You will need about 16 inches of new gas line to replace the filter. Don't ask why that much--if you have done it before, you will understand why!
Taper the new line, grease it, and stuff the tapered end thru the little hole where you pulled the old filter hose out, and then keep stuffing the hose in, until the tapered end comes out the gas filler cap hole. Cut the tapered end off, install the filter, then pull the hose back thru, until the filter is on the bottom of the tank, leaving it loose enough that it can flop around in the tank! Attach the other end and its done!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here