|
Wed, Apr 7, 10 at 9:09
| When I move the mower lever down on my Husqvarna 155 AWD the mower deck blades should turn on but it doesn't. The mower worked fine till I lifted up the deck to inspect the blades and I just installed a optional skid plate kit to where I had to remove some linkage to install it and put the linkage back. Is there somethink I may have accidently disconnected and what should I look for. Thanks in advance for your help and suggestions. |
Follow-Up Postings:
|
| Is the rear deck tab installed in the "slot"? Beyond that, review the decal for deck removal and make sure that belt, spring etc had been reinstalled. |
|
- Posted by davefrommd Maryland (My Page) on Wed, Apr 7, 10 at 16:08
| The mower deck is in front of the machine. I think you bring up a good thought here, I'll pull the mower deck out again and see if something has neen disconnected or needs to be connected. This is a 4x4 model. Thanks for your help. dave |
|
| I'm familiar w/ the machine. The easiest thing to miss when reinstalling the deck is that tab positioning, which is located at the center rear of the deck- to put it a better way. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.