Return to the Lawn Mowers Forum | Post a Follow-Up

 o
Installed Reel Roller on Tru-Cut - Bedknife Touches Ground

Posted by tva1 (My Page) on
Thu, Apr 1, 10 at 10:29

Hello all. I am looking for advice from someone who is familiar with Tru-Cut homeowner series. I have an H20 and just installed a reel roller (replaces front caster wheels). When I lower the mower to its lowest cut setting, the bedknife hits the ground. The second setting is fine.

I know I can leave it as is and just remember not to use the first (lowest) setting, but I would really like to adjust it so that I can. Does anyone know what I need to adjust? Thanks in advance!


Follow-Up Postings:

 o
RE: Installed Reel Roller on Tru-Cut - Bedknife Touches Ground

  • Posted by canguy British Columbia (My Page) on
    Thu, Apr 1, 10 at 21:57

Why do you need the lowest setting? Are you preparing putting greens? Normally, the major settings are done with the wheels, the fine tuning is accomplished with the roller.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here