|
Wed, Apr 21, 10 at 11:24
| Ok so the other day I was cutting my lawn and as the grass is so big, I went over the wire by accident and now my wires are in two peices. Inside the wire is 2 wires that when I connect together and tape up there is still no sign of it working. I tried the fuse and replaced it but still no signal of life. Anyone can show me a tutorial on how to put the wire back together again?.. One is a blue wire and one is a brown wire. I connect them directly to whatever colours they are, blue 2 blue and brown 2 brown but still no luck. Also I twist them together so they do not split up and then tape each one up individually!.. Anyone able to help please?
Thanks |
Follow-Up Postings:
|
- Posted by orangedotfever (My Page) on Wed, Apr 21, 10 at 13:00
| I assume that you are running a corded electric mower. Did you check to see if you tripped the breaker to the outlet that you are plugging it into? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.