Return to the Lawn Mowers Forum | Post a Follow-Up

 o
mclane front throw

Posted by rob31 none (My Page) on
Mon, Apr 28, 14 at 12:06

i was cutting the grass yesterday and i went over a something and now my blade hits the lower cutting surface and it makes a clanking noise anyone have any idea of what went wrong and how can i fix it the mower is about 6 months old?


Follow-Up Postings:

 o
RE: mclane front throw

Tilt the mower back so that you can exam the Bedknife.
Rotate the reel slowly by hand and see if it hits the knife. If all of the blades hits the knife. Readjust the knife.

It it only hits in one area of a blade. Check the blade for damage.

The bedknife looks like #71 in the photo and is located on the bottom of the mowers frame. This is not a drawing of your mower. Most reel mowers use the same basic design and the photo is just to show what part to check closely.


 o
RE: mclane front throw

only one blade hits but the blade looks good doesnt have any cracks or bends, the blade knife loos good to no damage to it,


 o
RE: mclane front throw

I looked at it again and i have about 5 blades rubbing on the blade knife any suggestions on how to fix machine is only about 7 months old.

This post was edited by rob31 on Tue, Apr 29, 14 at 0:01


 o
RE: mclane front throw

The Manual should have a section on how to adjust the Bedknife and at what clearance it should be set at.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here