|
Sat, Apr 3, 10 at 12:46
| I have an older Murray and the bushing on the bottom of the Spindle broke. It looks like it's a one piece design. I've tried to look up my model # with no luck. The only parts I find on the internet are a separate Spindle and mandrels. Anyone know if they changed them from a one piece unit to ones that you can rebuild?
Model # 4072x92f
|
Follow-Up Postings:
|
| Are you perchance missing a digit in the model #? Only the more later Murrays- early / mid 2000's started to use the one piece spindle that I know of. |
|
- Posted by net_worker (My Page) on Sat, Apr 3, 10 at 18:42
| The Murray spindle has always been reparable. Once the pulley and blade is removed the shaft can be carefully driven out. Each of the parts are available separately or as a unit. The jack shafts usually don't come with the spindle because there are so many different lengths. mike merritt |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.