|
Sat, Apr 28, 12 at 16:24
| I'm trying to replace a rear pivot arm on a model 20332 Toro Recycler. After removing the wheel, retainer ring, pinion gear, and washers, I'm not sure how to get the pivot arm removed. The new part is threaded, so I'm assuming the old part is also. I soaked everything with PB Blaster, now what?
Before I strongarm this and cause damage, is there something I am missing? |
Follow-Up Postings:
|
| Best to just block the arm and give the nut assy behind the arm a quick snap. They tend to lock in tight. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.