|
Thu, Apr 8, 10 at 19:48
| I failed to put the hardened washer and lock washer on when I replaced the blade on my sp mower. The blade adapter broke (big chunk around the key) and I finally found a replacement adapter. The key is the circle sector type and I need to know if the flat part goes into the motor shaft keyway or into the blade adapter keyway. I have new washers and will never forget to put them on again. Thanks for your help. |
Follow-Up Postings:
|
| Depends on the type of key way in the shaft. If it is short and semi circle the key will only go in one way. If it is a square slot use a straight key rather than the woodruff. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.