|
Mon, Apr 5, 10 at 20:13
| I'm attempting to change the oil in my Toro model 20438 lawn mower for the first time and would like any and all advice available. Thanks! |
Follow-Up Postings:
|
- Posted by chesapeakebeach (My Page) on Mon, Apr 5, 10 at 20:59
| Run the engine a couple minutes before beginning to warm the oil so it flows better. Do you have the instruction manual? If not, go onto https://homeownersolutions.toro.com/ and get it -- oil change directions are on page 13. It often helps to have somebody hold the oil drain pan when the oil first starts to drain. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.