|
Thu, Apr 19, 12 at 22:02
| I took the updraft carb apart and the main jet threads are a little messed up and can not get the new one back in, What size threader do i need to rethread where the main jet go's into the carb? |
Follow-Up Postings:
|
| Take the jet to the hardware store and match up with a tap. |
|
- Posted by ggoyeneche New Jersey (My Page) on Fri, Apr 20, 12 at 8:43
| There are two uncommon threads used on a Briggs Flo-Jet: 5/16 - 32 One is for threading nozzle to body. other is for threading needle to body. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.