|
Tue, May 25, 10 at 9:57
| mower ran fine, replaced both drive belts. now mower does not want to move. let out on clutch it tries to move, push the clutch in slightly, mower will crawl. |
Follow-Up Postings:
|
| 1. Wrong belt 2. Belt routed wrong 3. The belt tension pulley froze up or has a weal spring |
|
| hippy, thanks for the info. the belts are correct and routed properly. i had checked and lubed all the pulleys when changing the belts. did not think about the spring, i will check. thanks! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.